 | Heavy Duty Pressure Switch Ref: 90217
Sealed for moisture resistance and comes with 1/8" NPT male port fitting.
For 12 and 24 volt systems upto 30 amps. 
Price:
£19.00
£22.33 (inc VAT at 17.5%)
|
Pressure Seting
110 PSI on, 145 PSI off (90217)
140 PSI on, 175 PSI off (90218)
140 PSI on, 175 PSI off (90219)
165 PSI on, 200 PSI off (90221)
90 psi on, 120 psi off (90223)
|
|
 | Pressure Switch Ref: 90100
Pressure switch (1/8in NPT male port fitting)
For 12 and 24 volt systems upto 25 amps.
Price:
£15.45
£18.15 (inc VAT at 17.5%)
|
Pressure setting
90 psi on, 120 psi off (90100)
85 psi on, 105 psi off (90101)
100 psi on, 145 psi off (90102)
165 psi on, 200 psi off (90103)
|
|
 | Pressure Switch with Built in Relay Ref: 90110
Moisture resistant and tested to last over 10,000 cycles. They measure 4.25”L x 2.25”W and come with 1/8” male port fitting. Leads are pre-fitted with insulated ¼” male push-to-connect terminals that are clearly marked.
* For 12-Volt systems only - up to 40 amps
Price:
£17.16
£20.16 (inc VAT at 17.5%)
|
Pressure Setting
85 psi on, 105 psi off (90110)
110 psi on, 150 psi off (90111)
90 psi on, 125 psi off (90113)
165 psi on, 200 psi off (90118)
|
|
 | Illuminated Panel Gauge Ref: 20062
This is the same gauge used in the on board hook up kit. This gauge is for those who already have an onboard air set up and wish to fit a pressure monitor. This kit comes with built-in on/off switch, mounting bracket, 20ft extension wire with fuse, terminals and grommet strip. This kit is rated for 30 amps
Price:
£27.52
£32.34 (inc VAT at 17.5%)
|
Amp
30 amp (20062)
20 amp (10061)
|
|
 | Onboard Hook-up Kit Ref: 20052
This kit comes with pressure switch with built-in relay, illuminated dash panel gauge with built-in on/off switch, and 20ft of positive extension wires and 20ft of air line. This kit comes with every part you will need to hook up a compressor to an air tank. This kit is rated 30 amp.
Price:
£71.38
£83.87 (inc VAT at 17.5%)
|
Pressure Setting
110 psi on, 150 psi off (20052)
85 psi on, 105 psi off (20053)
90 psi on, 125 psi off (20055)
|
|
 | 20 FT. Freeze Resistant Wire Ref: 92915
-40°F to 158°F
12 gauge
Price:
£8.58
£10.08 (inc VAT at 17.5%)
|
|
|
| | 20 FT. Freeze Resistant Wire Ref: 92917
-40°F to 158°F
16 gauge
Price:
£7.74
£9.09 (inc VAT at 17.5%)
|
|
|
| | 20 FT. Freeze Resistant Wire Ref: 92918
-40°F to 158°F
16 gauge with 20-amp Inline Fuse Holder (not shown)
Price:
£9.68
£11.37 (inc VAT at 17.5%)
|
|
|
 | Insulated Terminals Ref: 92920
Pack of 5
Price:
£1.29
£1.52 (inc VAT at 17.5%)
|
Choose
1/4" female / 12 gauge (92920)
1/4" female / 16 gauge (92921)
1/4" male / 12 gauge (92922)
1/4" male / 16 gauge (92923)
|
|
 | Fuse Holder Ref: 92945
Moisture Resistant Fuse Holder.
Price:
£1.68
£1.97 (inc VAT at 17.5%)
|
Choose
20 to 30 amp / 16 gauge (92945)
30 to 40 amp / 12 gauge (92946)
|
|
 | Spade Fuses Ref: 92931
Pack of 5
Price:
£1.29
£1.52 (inc VAT at 17.5%)
|
Choose
20-amp Fuse (92931)
30-amp Fuse (92932)
40-amp Fuse (92933)
|
|
 | Fuse Holder Ref: 92952
Fuse Holder w/Mounting Tabs
60 amp / 8 gauge
Moisture Resistant.
Price:
£8.39
£9.86 (inc VAT at 17.5%)
|
|
|
 | 40 Amp Relay Ref: 93940
40 Amp Relay
Price:
£3.57
£4.19 (inc VAT at 17.5%)
|
Choose
40-amp Relay 40a-12v (93940)
40-amp Relay 40a-24v (93943)
|
|
 | 80 Amp Relay Ref: 93980
80 Amp Relay
Price:
£23.33
£27.41 (inc VAT at 17.5%)
|
Choose
40-amp Relay 40a-12v (93940)
40-amp Relay 40a-24v (93943)
|
